How to avoid unclean sand washing and serious loss of fine sand in the production process-Shenyang Boyeqiang Heavy Machinery Equipment Co., Ltd.

How to avoid unclean sand washing and serious loss of fine sand in the production process

Release time:

2020-10-29

In order to ensure that the machine sand is cleaner and has better quality after production, it will be cleaned using a sand washer, and the commonly used equipment in this process is spiral sand washer and wheel sand washer. However, after cleaning by these two types of sand washers, a problem will arise that the sand cannot be cleaned and the loss of fine sand is very serious.
　　
In view of the above problems, the company has summed up experience after decades of hard work in the machine sand making equipment industry and provided customers with two solutions.
  　　
LX-spiral sand washer + HS-T dewatering screen
  　　
After the sand washer, install a dewatering screen to avoid the sand washer due to the excessive amount of sand, resulting in insufficient sand purity and unclean sand.
  　　
The main function of the dewatering screen is to dehydrate, demudge, and demediate the sand produced, and its working principle is to rely on the large linear vibration of the low inclination angle of the equipment, combined with its own sparknet to clean the sand on the screen, so that the sand is discharged from the screen, and the wastewater is discharged from under the screen to the tailings pump tank.
  　　
HS - Tailing Sand Recycling All-in-One Machine
  　　
This method does not use a sand washer, and directly adopts a tailing sand recovery integrated machine. The machine is composed of motor, slurry pump, cyclone, vibrating screen, cleaning tank, return box, etc., and integrates the functions of sand washer and fine sand recovery machine, which not only reduces the production process, but also makes operation simpler and more convenient maintenance.
  　　
The working principle of the tailing sand machine is: the sand-water mixture is transported to the cyclone, the fine sand concentrated by centrifugal classification is provided to the vibrating screen through the grit nozzle, after dewatering by the vibrating screen, the fine sand and water are effectively separated, a small amount of fine sand, mud, etc. are returned to the cleaning tank through the return box, and when the liquid level of the cleaning tank is too high, it is discharged through the discharge port. The weight concentration of the recycled material of the linear vibrating screen is 70%-85%. Adjusting the fineness modulus can be achieved by changing the pump speed, changing the mortar concentration, adjusting the overflow water, and replacing the sand nozzle. So as to complete the three functions of cleaning, dehydration and grading.